Material guide & Care instructions

Stoneware

Stoneware clay is commonly used in ceramic production and contains a higher proportion of quartz. The firing temperature is typically between 1200–1300°C. Depending on the placement in the kiln, colours may vary slightly.

In Sweden, stoneware clay was discovered as early as the 18th century and is still used today by the few remaining stoneware factories in Skåne.

Reactive Glaze

Reactive glaze gives each product a unique appearance. Glaze is used on both porcelain and earthenware for aesthetic and functional reasons – it creates a beautiful surface while also making the product more water resistant.

During firing at approximately 1250°C, the different components of the glaze react differently to the heat. This creates natural variations in colour and texture, where small pores and speckles may occur on the surface.

These variations are a natural part of the manufacturing process and contribute to the vibrant and unique character that we value and strive for.

Terracotta

Terracotta comes from the Italian words terra (earth) and cotta (fired). It is an unglazed earthenware that usually has a reddish-brown colour.

The colour depends on the amount of iron oxide in the clay and may therefore vary between red, brown and yellow. The colour may also change slightly when the product becomes moist.

Terracotta is naturally resistant to mould, bacteria and insects.

Cement

Cement consists of a mixture of limestone and clay that hardens when combined with water and air.

To make cement products more water resistant, a silicone treatment is often applied. Please note that cement is a porous material and should not be left outdoors during winter, as water may penetrate and cause cracking during frost.

Dolomite

Dolomite is a white and porous clay. Its porous structure makes it easier to achieve the desired colour during glazing.

Please note that dolomite products should not be stored outdoors during winter.

Tip

Always use pads or coasters under pots and vases where water may occur. Even though our products are water resistant, small air bubbles or fine cracks in the glaze may allow moisture to pass through.

To protect delicate surfaces, we recommend not placing them directly on sensitive materials.

GLASS

Glass has a melting temperature of approximately 1500°C but is processed when the temperature is between 1050–1200°C.

Glass can be coloured in the mass, spray-painted, or decorated with foil.

Spray-Coloured Glass

Spray-coloured glass is treated with a thin layer of spray paint that gives the glass a specific colour or finish. The colour usually lies on the surface and does not affect the structure of the glass, meaning the glass can still remain transparent or semi-transparent.

Foiled Glass

Foiled glass means that a decorative foil is applied to the surface. The foil can create patterns, colour effects, or give the glass a frosted or mirror-like finish.

Care Instructions

Glass with spray colour or foil decoration is delicate and should therefore be hand washed in water with a maximum temperature of 30°C.

Hand-Painted Glass

To preserve hand-painted glass in the best possible way, we recommend gentle hand washing in water up to 30°C. Avoid abrasive sponges and strong detergents.

ACACIA / MANGO WOOD

Treated Wood

Products made from acacia or mango wood may be treated with a food-safe oil.

Clean the product with a lightly damp cloth. It should not be placed in a dishwasher, soaked, or submerged in water as this may cause the wood to crack.

The product can be sanitized by wiping it with a mixture of water and white wine vinegar or with a dedicated chopping board cleaner.

For best durability, we recommend regularly treating the surface with food-safe oil.

Untreated Wood

Untreated products are not oiled and may therefore stain more easily during use.

To maintain the product in good condition, it is recommended to regularly treat it with food-safe oil.

Avoid dishwashers and soaking in water. Instead, clean with a damp cloth or a solution of water and white wine vinegar.

TEXTILES

Linen

Linen is a woven fabric made from fibres of the flax plant.

The material has a natural structure where irregularities are normal and contribute to its character. Pulls in the fabric may occur but do not affect durability and can often disappear by gently stretching the fabric while damp.

Weaving knots are also completely natural.

Cotton

Cotton is a natural material made from fibres of the cotton plant.

The material is soft, durable and breathable, making it highly appreciated in textiles. Cotton has a fairly even structure, but small variations in the weave may occur and are completely natural.

The material is easy to care for and retains its shape well during normal use.

Polyester

Polyester is a synthetic fibre made from polymers. The material is durable, shape-retaining and has excellent colour fastness. Polyester is resistant to wrinkles and shrinkage, making it easy to maintain.

In some textiles, polyester is blended with natural fibres to combine durability with a softer feel.

CUSHION COVER CARE

Linen Cushion Covers

Linen is a natural material with a vibrant structure.

Wash at up to 30°C, preferably on a gentle cycle. Avoid strong detergents and bleach. Allow the cushion cover to air dry and avoid tumble drying, as the material may shrink.

Iron at medium temperature if needed, preferably slightly damp for best results.

Cotton Cushion Covers

Cotton is durable and easy to care for.

Wash at 30–40°C, depending on the product care label. Avoid strong detergents that may affect the colour. Air drying is recommended to preserve shape and quality. Iron at medium temperature if needed.

Polyester Cushion Covers

Polyester is a durable and shape-retaining material.

Wash at up to 30°C. The material dries quickly and rarely requires ironing. Avoid high heat during washing and drying to preserve the material’s structure.

Embroidered Cushion Covers

To preserve both the fabric and the embroidery, we recommend gentle care.

Dry clean only. Avoid strong detergents and bleach that may damage both the fabric and thread. Do not tumble dry – allow the cushion cover to air dry flat or hanging. If needed, iron at low temperature from the reverse side. Avoid twisting or rubbing the embroidery during washing.

LINSEED OIL PAINTED FURNITURE

Furniture painted with linseed oil paint is treated with a traditional paint based on linseed oil. The paint penetrates the wood and creates a durable and natural surface that ages beautifully over time.

Care Instructions

Clean the furniture with a lightly damp cloth and mild detergent when needed. Avoid strong chemicals.

If necessary, the surface can be refreshed by applying a thin layer of linseed oil or linseed oil paint.

The furniture should be protected from prolonged moisture and harsh weather.

ADDITIONAL MATERIALS & TERMS

Hand-Printed & Hand-Painted

When patterns are hand printed or hand painted, variations occur as a natural part of the production process. These variations contribute to the vibrant and unique character that we value and strive for.

Polyresin

Polyresin is a plastic material with a character similar to ceramic and stone. The material is suitable for casting detailed shapes and figures.

Please note that polyresin is not frost resistant.

Reused Wood

Reclaimed wood may contain natural cracks, colour variations and irregularities. These make each product unique and give it a distinctive appearance.

Climate changes such as temperature and humidity may affect the wood as it is a living material. This is completely natural and does not affect the product's function.

Reused

Reuse means that new products are created from materials that were previously no longer used. It may also involve products that were previously used, discarded or replaced but are now given a new life.

These products often have a beautiful patina and a unique story.

CANDLE HOLDERS & FIRE SAFETY

When using candle holders, it is important to always consider fire safety.

Place candle holders on a stable and heat-resistant surface and never leave burning candles unattended. Ensure that candles stand firmly in the holder and that there is sufficient distance from flammable materials such as textiles, curtains or decorations.

Do not let candles burn all the way down – extinguish them in good time before they reach the bottom of the holder.